1. Power and battery detection
Use Golf Cart special tools to measure the battery voltage and ensure sufficient power.
Check whether the Golf Cart battery connector is tight and intact. If necessary, clean and tighten the connection point.
2. Control system troubleshooting
Check the controller interface and wiring harness connection. If there is any abnormality, repair or replace it in time.
Reset or calibrate the basic parameters according to the controller manual.
3. Motor detection and maintenance
Test the electrical performance of the motor. If any problems are found, it should be repaired or replaced by professionals.
Check whether the Lithium Golf Carts motor shaft rotates flexibly, clean foreign objects, and lubricate the bearings.
4. Check the accelerator pedal
Confirm the working status of the Lithium Golf Carts accelerator pedal sensor and test whether the pedal signal is transmitted to the controller normally.
Check whether the mechanical connection part is broken, worn, etc., and make corresponding repairs.
5. Brake system confirmation
Operate the Golf Cart handbrake to ensure that it is fully released; check whether the hydraulic brake system has leakage or brake jamming problems, if so, adjust or repair it.